BREMBO Prime 08.D060.11 Bremseskive 300x12mm, 5, fullt ut

BREMBO Prime Brake Disc 08.D060.11 – High-quality solid rear disc for Audi and VW

The BREMBO Prime Brake Disc 08.D060.11 is an example of Italian engineering excellence – developed for drivers who value safety, precision, and durability. Manufactured by BREMBO, a trusted OEM supplier, this solid brake disc ensures consistent braking force and reliable performance under demanding driving conditions. Technical specifications include an outer diameter of 300.0 mm, a disc thickness of 12.0 mm and optimal heat management for rear axle applications.

The 08.D060.11 BREMBO brake disc features a solid design with 5 mounting holes and precise manufacturing tolerances. Made of high-carbon cast iron, it comes with a corrosion-resistant coating. The BREMBO Prime 08.D060.11 brake disc is supplied ready for installation and is approved according to ECE R90, meeting all European safety and quality standards.

Which vehicles are compatible with the BREMBO 08.D060.11?

For which Audi models is the BREMBO Prime 08.D060.11 brake disc suitable?

This brake disc is compatible with select variants of the following Audi models: A4 B9 Saloon (2015–present), A4 B9 Avant (2015–present), A4 B9 Allroad (2016–present), A5 B9 Sportback (2016–present), A5 B9 Convertible F57 (2016–present), A5 B9 Coupe F53 (2016–present), A6 C8 Saloon (2018–present), A6 C8 Avant (2018–present), A6 C8 Allroad 4AH (2018–present), A7 Sportback 4KA (2017–present), Q5 FY (2017–2024), Q5 FY Sportback (2021–2024). Note that individual trims and packages may vary in compatibility and you should always check via the VIN, OEN, and/or PR code to ensure the disc fits.

For which VW vehicles is the BREMBO 08.D060.11 brake disc suitable?

Certain variants of the following VW vehicle can be fitted with this brake disc: Polo III Classic 6V2 (1995–2006). Check via the VIN, the OEN of the discs, and/or the PR code of the brake system to check if your Polo III classic is compatible.

Installation instructions for BREMBO 08.D060.11

1. Replace brake discs in pairs to ensure balanced braking performance.

2. Consult the vehicle's service manual for the specific removal sequence and torque values.

3. Remove the wheels and the caliper. Support the caliper to avoid tension on the brake hose.

4. Remove the old disc: Loosen the retaining screw.

5. Thoroughly clean the hub from rust and dirt before installing the new disc.

6. Install the new disc and brake pads, then tighten the retaining screw and caliper bolts.

7. After installation, press the brake pedal several times and check the brake fluid level.

8. Bedding-in: Follow the vehicle manufacturer's recommendations; if none are provided, drive for at least 200 km using gentle, brief brake applications, avoiding hard braking and ABS activation during this period.

FAQ: BREMBO Prime Brake Disc 08.D060.11

Is the BREMBO brake disc 08.D060.11 suitable for Audi A4 B9 models?

The BREMBO Prime 08.D060.11 is compatible with select Audi A4 B9 Saloon, Avant, and Allroad variants. More powerful vehicles with "big brake" systems use rear brake discs that are 330x22mm and are not compatible with this disc. Always check the PR code of the brake system to be certain.

Can the BREMBO 08.D060.11 be used on Audi Q5 FY models?

Absolutely, this brake disc is specifically designed for select Audi Q5 FY (2017–2024) and Q5 FY Sportback models, ensuring optimal braking performance for these SUVs. Some variants use larger rear discs, though, so confirm compatibility via VIN and PR code.

Is the BREMBO brake disc 08.D060.11 compatible with Audi A6 C8 variants?

Yes, the Brake disc BREMBO 08.D060.11 fits certain Audi A6 C8 variants of the Saloon, Avant, and Allroad models, providing consistent braking performance across the range. Some trims provide more powerful braking systems with larger discs, so compare the VIN and PR code to check compatibility.

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 08.D060.11?

Yes, it is recommended to replace the brake pads together with new brake discs. This ensures optimal surface contact and consistent braking performance.

Is the BREMBO brake disc 08.D060.11 ventilated or solid?

This brake disc is solid. The solid design is ideal for rear axle applications, providing reliable braking performance with reduced complexity and weight.

How should new brake discs be properly bedded in?

During the first 200 km, perform moderate braking and avoid full stops. This allows a uniform friction layer to develop, extending the lifespan of both discs and pads.

What is the outer diameter and thickness of this brake disc?

The outer diameter is 300 mm and thickness is 12 mm – ideal for rear brake systems on premium vehicles requiring reliable stopping power.

Is this brake disc suitable for vehicles with ABS?

Yes, the BREMBO 08.D060.11 is mainly compatible with vehicles equipped with ABS. The fit and function are identical to the original parts.

Do I need special tools to install the BREMBO brake disc?

Usually no special tools are required for installation. Standard Torx and socket wrenches are typically sufficient. However, a torque wrench is essential to ensure correct tightening of all bolts and some advanced systems may require additional equipment.

What are the advantages of the BREMBO brake disc 08.D060.11 compared to other models?

The BREMBO Prime series offers superb material quality, precise manufacturing tolerances, and excellent corrosion resistance. The solid design provides optimal performance for rear axle applications with reduced unsprung weight.